JR Size Locking Tool Insert Set – You Choose

$0.00

  • For KeyBar JR
  • Made of Grade 5 6AL-4V Titanium .08″ thick
  • Uses a Titanium KB Detent Lock, allowing the tool to snap into the open/closed position with just the right amount of resistance
  • Cam Lock uses torsion bars with stainless steel studs
  • Locks are stackable allowing you to add extra tools
  • Chisel cannot be colored
  • Note: Will not work with full-size KeyBars

New Flathead Screwdriver Tool Insert

$21.95

In stock

New Phillips Screwdriver Tool Insert

$21.95

In stock

New Bottle Bomber Tool Insert

$17.95

In stock

New Mini Utility Tool Insert

$24.95

In stock

Mini Chisel Tool Insert

$39.95

In stock

JR Size Cam Lock

$0.00

In stock

Anodized Color

Customize your insert by choosing an anodized color below!

(+$5.00)
(+$5.00)
(+$5.00)
(+$5.00)
Anodized Color

Customize your insert by choosing an anodized color below!

(+$3.50)
(+$3.50)
(+$3.50)
(+$3.50)
Order total:

Description

Choose the locking tool insert you want for your KeyBar JR! These solid titanium tools function with the JR KB Detent Lock, which uses torsion bars with stainless steel studs that jump over cams machined on the tool inserts giving a satisfying SNAP when opened and closed with just the right amount of resistance. The locks are stackable allowing you to add extra tools. The JR Size only uses ONE tool per lock, whereas the Full Size KeyBar takes TWO of the new tools per lock.

The Bottle Bomber 2.0 insert for KeyBar is a bottle opener specially designed for the KeyBar. Bottle opener features a quick access tab, flathead screwdriver, and a pry tool and that locks in the open and closed position thanks to our new titanium KB Detent Lock system.


The Flathead Screwdriver Tool Insert 2.0 is a lightweight and light duty Grade 5 titanium #2 flat head screwdriver that locks in the open and closed position thanks to our new titanium KB Detent Lock system. Can also function as a pry tool.


The Phillips Screwdriver Tool Insert 2.0 is a lightweight and light duty Grade 5 titanium #2 phillips head screwdriver that locks in the open and closed position thanks to our new titanium KB Detent Lock system.


The Mini Utility tool is made up of a titanium body and steel blade that locks in the open and closed position thanks to our new titanium KB Detent Lock system. Included are ten blades. The blade can be removed without having to disassemble your KeyBar.

The Chisel is a more permanent version of the Mini Utility Tool, in that there is no removable blade. It is made of MagnaCut Stainless Steel and is a limited edition.


Blade Installation Instructions:
To install the blade, open the tension plate all the way to expose the pocket.  Drop the razor blade into place, making sure it is flat in the pocket so that it is secure.  Close tension plate. Mini Utility Tool Insert is ready for use.


Disclaimer:

The KeyBar Mini Utility Tool Insert is intended for use with your KeyBar product.  The Mini Utility Tool Insert is, of course, very sharp and could cause bodily injury if not handled carefully.  Users of the KeyBar Mini Utility Tool Insert should take special care to ensure that the blade insert itself is not left exposed when not in use, and that it is folded fully into the closed position.  Never use the Mini Utility Tool Insert while otherwise occupied or distracted, such as when operating a motor vehicle.  Users of the Mini Utility Tool Insert should also use extreme caution when using the Mini Utility Tool Insert, as there is the potential for bodily injury.   The Mini Utility Tool Insert is not a toy, and is likewise not intended to be used as a hunting, or similar knife, and will not withstand forces necessary to cut through thick or solid materials.  The Mini Utility Tool Insert is not a replacement for ordinary, or everyday knives, but is only intended for very light use.  KeyBar, LLC is not responsible for any injury caused by misuse of the Mini Utility Tool Insert or negligence on the part of its owner or user.

The KeyBar Chisel Tool Insert is intended for use with your KeyBar product.  The Chisel Tool Insert is, of course, very sharp and could cause bodily injury if not handled carefully.  Users of the KeyBar Chisel Tool Insert should take special care to ensure that the blade insert itself is not left exposed when not in use, and that it is folded fully into the closed position.  Never use the Chisel Tool Insert while otherwise occupied or distracted, such as when operating a motor vehicle.  Users of the Chisel Tool Insert should also use extreme caution when using the Chisel Tool Insert, as there is the potential for bodily injury.

The Chisel Tool Insert is not a toy, and is likewise not intended to be used as a hunting, or similar knife, and will not withstand forces necessary to cut through thick or solid materials.  The Chisel Tool Insert is not a replacement for ordinary, or everyday knives, but is only intended for very light use.  KeyBar, LLC is not responsible for any injury caused by misuse of the Chisel Tool Insert or negligence on the part of its owner or user.

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In