I have a nonstandard key; will it fit in the KeyBar®?

The best way to figure that out is to compare your key’s size and shape with the size and shape of the KeyBar®, using the information below.

We use #8-32 machine screws, and the post has a diameter of .164 inches, so the hole on the key would need to be large enough to fit on the post.

The total length of the KeyBar® is 3.5 inches. The distance between one end of the KeyBar® and the screw in that end is .375 inches. The distance between the two screws is 2.75 inches. The width of each end is 1 inch. If your key is longer than 2.75 inches but not longer than 3.125 inches, it will still fit.